Model	Carton Dimension	QTY/Carton	N.W	G.W	QTY for 20GP	QTY for 40HQ
60W/80W/100W/150W (AC120-347V)	34*34*14cm	1pC	3KG	3.81KG	1518PCS	4177PCS
200W/250W (AC120-347v)	38*38*16cm	1PC	4.6KG	5.52KG	1090PCS	3000PCS
100W/150W (AC277-480V)	34*34*21cm	1PC	4.58KG	5.44KG	895PCS	2462PCS
250W (AC277-480V)	38*38*22cm	1PC	6.57KG	7.4KG	615PCS	1692PCS

To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels.

Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.

Commercial installation, service and maintenance of luminaires should be performed by a qualified licensed electrician.

For The installation: If you are unsure about the installation or maintenance of the luminaires, consult a qualified licensed electrician and check your local electrical code.

To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.

Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.

Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.

Turn off the power when you perform any maintenance.

Verify that supply voltage is correct by comparing it with the luminaire label information.

Make all electrical and grounded connections in accordance with the National Electrical Code and any applicable local code requirements.

All wiring connections should be capped with UL approved wire connectors.

Avoid direct eye exposure to the light source while it is on.

Account for small parts and destroy packing material, as these may be hazardous to children.